Distributed-element model
In electrical engineering, the distributed-element model or transmission-line model of electrical circuits assumes that the attributes of the circuit (resistance, capacitance, and inductance) are distributed continuously throughout the material of the circuit. This is in contrast to the more common lumped-element model, which assumes that these values are lumped into electrical components that are joined by perfectly conducting wires. In the distributed-element model, each circuit element is infinitesimally small, and the wires connecting elements are not assumed to be perfect conductors; that is, they have impedance. Unlike the lumped-element model, it assumes nonuniform current along each branch and nonuniform voltage along each wire. The distributed model is used where the wavelength be
Analogue filterBelevitch's theoremCommensurate line circuitDependent sourceDistributed-elementDistributed-element circuitDistributed-element filterDistributed elementDistributed element modelDistributed elementsDistributionElectrical elementElectrical networkElectronic circuitElectronic filterEquivalent impedance transformsFilter (signal processing)Foster's reactance theoremGeorge Ashley CampbellGlossary of electrical and electronics engineeringHeaviside conditionImpedance analogyIndex of electrical engineering articlesInvention of radioInverted-F antennaLoading coilLumped-element modelMechanical filterMechanical–electrical analogiesMetamaterial antennaMicrowaveMicrowave engineeringMobility analogyNetwork analysis (electrical circuits)Parasitic element (electrical networks)Primary line constantsResonatorSimcenter AmesimSmith chartSystem analysis
Link from a Wikipage to another Wikipage
primaryTopic
Distributed-element model
In electrical engineering, the distributed-element model or transmission-line model of electrical circuits assumes that the attributes of the circuit (resistance, capacitance, and inductance) are distributed continuously throughout the material of the circuit. This is in contrast to the more common lumped-element model, which assumes that these values are lumped into electrical components that are joined by perfectly conducting wires. In the distributed-element model, each circuit element is infinitesimally small, and the wires connecting elements are not assumed to be perfect conductors; that is, they have impedance. Unlike the lumped-element model, it assumes nonuniform current along each branch and nonuniform voltage along each wire. The distributed model is used where the wavelength be
has abstract
In electrical engineering, the ...... such as overhead power lines.
@en
Wikipage page ID
Link from a Wikipage to a Wikipage in a different language about the same or a related subject.
page length (characters) of wiki page
Wikipage revision ID
922,876,994
Link from a Wikipage to another Wikipage
wikiPageUsesTemplate
comment
In electrical engineering, the ...... s used where the wavelength be
@en
label
Distributed-element model
@en