Determination of the minimum number of marginal gap measurements required for practical in-vitro testing.
about
Accuracy and reliability of methods to measure marginal adaptation of crowns and FDPs: a literature review.Influence of convergence angle and cement space on adaptation of zirconium dioxide ceramic copings.Correlation between margin fit and microleakage in complete crowns cemented with three luting agentsDifferent CAD/CAM-processing routes for zirconia restorations: influence on fitting accuracy.Influence of veneering materials on the marginal fit and fracture resistance of an alumina core system.Influence of porcelain veneering on the marginal fit of Digident and Lava CAD/CAM zirconia ceramic crowns.A comparison of the marginal adaptation of cathode-arc vapor-deposited titanium and cast base metal copingsMarginal and internal discrepancies related to margin design of ceramic crowns fabricated by a CAD/CAM system.A comparison of marginal fit of glass infiltrated alumina copings fabricated using two different techniques and the effect of firing cycles over them.Evaluation of the marginal and internal gap of metal-ceramic crown fabricated with a selective laser sintering technology: two- and three-dimensional replica techniques.A comparitive evaluation of the marginal adaptation of zirconium coping and nickel-chromium coping using shoulder finish line design: an invitro studyComparative Evaluation of Marginal and Internal Gap of Co-Cr Copings Fabricated from Conventional Wax Pattern, 3D Printed Resin Pattern and DMLS Tech: An In Vitro Study.A comparative study of gold UCLA-type and CAD/CAM titanium implant abutments.Marginal Gap of Milled versus Cast Gold Restorations.Marginal accuracy of nickel chromium copings fabricated by conventional and accelerated casting procedures, produced with ringless and metal ring investment procedures: A comparative in vitro studyInfluence of Tooth Preparation Design on Fitting Accuracy of CAD-CAM Based Restorations.The Marginal Fit of CAD/CAM Monolithic Ceramic and Metal-Ceramic Crowns.Comparison of the fit of cast gold crowns fabricated from the digital and the conventional impression techniques.Effect of water temperature on the fit of provisional crown margins during polymerization: An in vitro study.Discrepancies in marginal and internal fits for different metal and alumina infrastructures cemented on implant abutments.The effect of veneering on the marginal fit of CAD/CAM-generated, copy-milled, and cast metal copings.Evaluation of fit and efficiency of CAD/CAM fabricated all-ceramic restorations based on direct and indirect digitalization: a double-blinded, randomized clinical trial.Effect of Split-File Digital Workflow on Crown Margin Adaptation.Marginal Fit of Lithium Disilicate Crowns Fabricated Using Conventional and Digital Methodology: A Three-Dimensional Analysis.In vitro evaluation of the marginal and internal discrepancies of different esthetic restorationsA comparative study of the effect of four consecutive firing cycles on the marginal fit of all: ceramic crown system and metal ceramic crown system.Comparative Evaluation of Conventional and Accelerated Castings on Marginal Fit and Surface Roughness.Marginal adaptation of Spinell InCeram and feldspathic porcelain laminate veneers.Marginal adaptation of all-ceramic crowns on implant abutments.The Effect of Sintering Time on the Marginal Fit of Zirconia Copings.Comparative evaluation of marginal fit and axial wall adaptability of copings fabricated by metal laser sintering and lost-wax technique: An in vitro study.Fracture load and marginal fit of shrinkage-free ZrSiO4 all-ceramic crowns after chewing simulation.Influence of framework configuration on the marginal adaptation of zirconium dioxide ceramic anterior four-unit frameworks.Marginal adaptation of three-unit fixed partial dentures constructed from pressed ceramic systems.In vitro analysis of the marginal adaptation and discrepancy of stainless steel crowns.Influence of Material Selection on the Marginal Accuracy of CAD/CAM-Fabricated Metal- and All-Ceramic Single Crown Copings.
P2860
Q31110295-2455F243-E6FC-4543-BF29-382726176422Q33349875-FBDF662E-9FA1-45D2-A987-D0B80641BDF7Q33393706-1A1846C1-F81B-4A0D-9D11-6417919F0821Q33585270-354C0D61-BF79-445F-A843-D5C7A967F77EQ33765129-52CAE156-9C4B-4104-9ADD-EBB169B54E75Q33774268-AC3580D8-FF56-48F0-BF3E-BFA67B759FD6Q33922411-BB68822F-FB9A-4593-9C8D-CABDFB632202Q34066015-01433546-782A-4ADC-9EC6-6B881786DF95Q34132948-A6A27D17-B10A-4EF5-BA8F-14B47E3D7D86Q34766943-7882F8C9-1ED3-4E62-A657-622E075FE78EQ35057348-DF261406-3E43-4934-8756-756E34E994C4Q35085292-4086BCD9-9A95-4112-9501-FA3B8FB9E0EAQ35113644-C50171B5-F2C0-49F8-B875-781AEBAA7F89Q35914494-63C21996-EE7C-465D-AA21-C3A94E19A86DQ35940527-FC9E655F-A107-418C-9B0F-1CF633AB7144Q35984683-CB238791-5D05-4828-A2BC-8605356B5F04Q36268027-69EA7FF1-3067-4926-8DEE-DE99BAA6930DQ36292563-02EE92BC-D836-4B66-9B9C-449933632C46Q36307511-48BC60F0-FEFF-48A4-AF7F-4ECCB0C55E0EQ38391183-E4273686-F54E-4BAA-A064-944C019DA111Q39018714-F0F33FC3-FA9D-4245-BF81-C0B719B7EFDFQ40288088-CB994270-94EE-4F53-9442-18C840417067Q40477373-18FCEEF9-BC8C-40E4-96D4-12D50BBE055DQ40498468-69785155-6FD9-474B-B652-75B7AA943DF1Q41870736-12860EB9-9357-4BDB-A6CC-5ECAB723294FQ42059503-7A744FBC-E22F-4E9E-BE20-71271BCE53DFQ42379178-7A18F7AF-F232-4C19-A702-F6C051BA3441Q42766142-68266341-43DD-4FE1-B3F4-9A42C6397971Q46778184-21465E46-2788-4498-98FB-0AB235DCCB6EQ48508257-3F7A3748-744C-4934-A903-BCB0CF117A73Q50073808-7EF71BB0-70BB-43A9-A1E8-A6C2823E204FQ51127962-0F6D96F3-DF84-417B-93B7-E8FCB94C8ED3Q51255279-F34DD4B1-103F-4C9F-9415-8C21E09D715FQ51655540-C337F104-313B-458B-AA4E-CA63F4034D67Q55012699-9E6A1724-4F11-4E20-8C25-3FCE7B0D5DE7Q55065502-D3AEEE98-7DD7-4F0A-A8C7-85F0CC943306
P2860
Determination of the minimum number of marginal gap measurements required for practical in-vitro testing.
description
2000 nî lūn-bûn
@nan
2000 թուականի Յունուարին հրատարակուած գիտական յօդուած
@hyw
2000 թվականի հունվարին հրատարակված գիտական հոդված
@hy
2000年の論文
@ja
2000年論文
@yue
2000年論文
@zh-hant
2000年論文
@zh-hk
2000年論文
@zh-mo
2000年論文
@zh-tw
2000年论文
@wuu
name
Determination of the minimum n ...... or practical in-vitro testing.
@ast
Determination of the minimum n ...... or practical in-vitro testing.
@en
type
label
Determination of the minimum n ...... or practical in-vitro testing.
@ast
Determination of the minimum n ...... or practical in-vitro testing.
@en
prefLabel
Determination of the minimum n ...... or practical in-vitro testing.
@ast
Determination of the minimum n ...... or practical in-vitro testing.
@en
P2093
P1476
Determination of the minimum n ...... or practical in-vitro testing.
@en
P2093
P356
10.1016/S0022-3913(00)70087-4
P407
P577
2000-01-01T00:00:00Z