Influence of light intensity on polymerization shrinkage and integrity of restoration-cavity interface.
about
Influence of photoactivation method and mold for restoration on the Knoop hardness of resin composite restorations.Effect of light polymerization time, mode, and thermal and mechanical load cycling on microleakage in resin composite restorations.Shrinkage Stresses Generated during Resin-Composite Applications: A Review.Management of shrinkage stresses in direct restorative light-cured composites: a review.Relationship between bond strength and marginal and internal adaptation of composite restorations photocured by different methods.Evaluation of depth of cure and knoop hardness in a dental composite, photo-activated using different methods.Cuspal Deflection of Premolars Restored with Bulk-Fill Composite Resins.Influence of handpiece maintenance sprays on resin bonding to dentin.A clinical survey of the output intensity of 200 light curing units in dental offices across MaharashtraAn In-Vitro Comparison of Micro Leakage Between Two Posterior Composites Restored with Different Layering Techniques Using Two Different LED Modes.Effects of different light curing units/modes on the microleakage of flowable composite resins.Effects of light curing method and exposure time on mechanical properties of resin based dental materials.Comparative evaluation of the microtensile bond strength of bulk fill and low shrinkage composite for different depths of Class II cavities with the cervical margin in cementum: An in vitro study.Analysis of gap formation at tooth-composite resin interface: effect of C-factor and light-curing protocol.Influence of light-curing mode on the erosion preventive effect of three different resin-based surface sealants.Influence of light curing source on microhardness of composite resins of different shades.Influence of the curing method on the post-polymerization shrinkage stress of a composite resin.Composite depth of cure using four polymerization techniques.Modified Class II open sandwich restorations: evaluation of interfacial adaptation and influence of different restorative techniques.Reduction of polymerization shrinkage stress and marginal microleakage using soft-start polymerization.Curing depths of a universal hybrid and a flowable resin composite cured with quartz tungsten halogen and light-emitting diode units.Light polymerization during cavity filling: effect of 'exposure reciprocity law' and the resulted shrinkage forces on restoration margins.Impact of curing protocol on conversion and shrinkage stress.Effect of LED curing on microleakage and microhardness of Class V resin-based composite restorations.The effect of insertion and photopolymerization techniques on microleakage of class V cavities--a quantitative evaluation.Effect of hydrophobic surface treated fumed silica fillers on a one-bottle etch and rinse model dental adhesive.Adhesive systems used for sealing contaminated surfaces: a microleakage evaluation.Effect of pulse vs continuous micro-xenon irradiation on the shear bond strength of a light-cured orthodontic composite resin.The effect of LED curing mode on microleakage of Class V cavity restored by silorane-based composite.[Effect of techniques of composite resin insertion and polymerization on microleakage and microhardness].Association of photoactivation methods and low modulus liners on marginal adaptation of composite restorations.Evaluation of depth of cure and Knoop hardness in a dental composite photo-activated using different methods.Effect of irradiation mode and filling technique on resin/dentin bonding strength in Class I cavities.Does layering minimize shrinkage stresses in composite restorations?A comparative evaluation of effect of modern-curing lights and curing modes on conventional and novel-resin monomers.
P2860
Q34413356-A5C512D6-2147-4114-BCDC-06220FAB4737Q34546837-11CE6639-A3FF-4878-B6B4-C6EAAF999018Q34624385-48442374-52E4-436A-9132-887088DEB8EEQ38154744-0A994FFA-7C20-4370-A680-CB5E55DDE901Q39767401-BFB80E36-972A-455D-9C1C-C419DE043C9FQ39918775-DB40F8E9-0CCA-4364-B86A-24065E2A9142Q39985992-41BD0B0C-FDA4-48FC-8DBD-93CEAB32CFD0Q40435026-3CC339C1-2832-4BC7-A72E-895CC218270FQ40850409-B3494A17-6C9F-4B24-B898-9CA9FDC0C2F2Q41635352-2C7AEFDD-B42E-4A4B-B19C-4EC957CF108CQ41842829-4EB3C538-030B-47C9-9CD2-0B973DF639A4Q41871832-F37248DA-8FB3-46EA-A530-251AD9F0BDD6Q41909387-F9A1B11A-49FE-4C23-A261-01547F74F366Q42144655-074E75C8-6616-4492-8402-9BE7BD222D6CQ42325597-5E3C1096-D3B5-46C2-BCF7-D54A3971E7F1Q43145494-2AF9820E-1E32-4359-B944-603BAC53D70EQ43145902-2AF4D819-CFDF-4F3B-879C-BBF6E68F069CQ43146085-CF2D25E0-871E-459C-8A37-AFF3B56DDF25Q44065914-3B9B5AC1-6294-4ED9-8F35-D8CD5A9F3CD4Q44450577-5617A976-3A61-4638-AE66-2ACBECA9F1A2Q44937542-623B94FD-3626-4632-BED8-F3DF187C981EQ45916440-E8A2BEAB-CEA1-474D-A022-96ADB3622A7BQ46658447-F1E5CB76-B0C1-48D1-A868-551F28E0AE6AQ46755269-900D296C-290A-4E23-A447-A7B44AE36D95Q46756527-B96E14A2-0814-4D15-AE68-D0F903D9420AQ47221196-B09849F6-EE18-4C40-9543-034117138E57Q48520873-832F573A-2F52-4816-B80A-49F7D3DC8576Q48965482-C5E6BB7A-8E90-418E-B0A8-520CB553471CQ50238113-3970A5A3-D599-4FC9-A3D2-32DBA1016D48Q50497809-8E36C043-9E3C-4531-9B32-04D7FD683F73Q51493695-B6521004-8465-49F2-815E-EE415DCA300DQ51516294-4DFA1C8B-924C-437E-879F-4EA95F54C910Q51562109-74567C38-1AD4-4AA7-BF71-D0335512B01EQ51794907-839BA191-20CB-4FFE-8F64-713E0DB67B5CQ52599864-CB1F5E1B-D4AA-4562-86EF-1071F4E6B250
P2860
Influence of light intensity on polymerization shrinkage and integrity of restoration-cavity interface.
description
1995 nî lūn-bûn
@nan
1995年の論文
@ja
1995年論文
@yue
1995年論文
@zh-hant
1995年論文
@zh-hk
1995年論文
@zh-mo
1995年論文
@zh-tw
1995年论文
@wuu
1995年论文
@zh
1995年论文
@zh-cn
name
Influence of light intensity o ...... restoration-cavity interface.
@en
type
label
Influence of light intensity o ...... restoration-cavity interface.
@en
prefLabel
Influence of light intensity o ...... restoration-cavity interface.
@en
P2093
P1476
Influence of light intensity o ...... restoration-cavity interface.
@en
P2093
Davidson CL
Feilzer AJ
P2860
P304
P356
10.1111/J.1600-0722.1995.TB00033.X
P577
1995-10-01T00:00:00Z