about
Quaternary ammonium silane-functionalized, methacrylate resin composition with antimicrobial activities and self-repair potential.Toxicity evaluation of two dental composites: three-dimensional confocal laser scanning microscopy time-lapse imaging of cell behavior.A survey of power density of light-curing units used in private dental offices in Changchun City, China.Effect of heat application on the mechanical behaviour of glass ionomer cements.Influence of light-activation protocol on methacrylate resin-composite evaluated by dynamic mechanical analysis and degree of conversion.Metabolic activity of odontoblast-like cells irradiated with blue LED (455 nm).The dental curing light: A potential health risk.Development of Novel Photoinitiators as Substitutes of Camphorquinone for the LED Induced Polymerization of Methacrylates: A Bis-Silyl Ketone.Comparison of the bonding strengths of second- and third-generation light-emitting diode light-curing units.Fatigue resistance of CAD/CAM resin composite molar crownsDimethacrylate network formation and polymer property evolution as determined by the selection of monomers and curing conditions.Bond durability of universal adhesive to bovine enamel using self-etch mode.Effects of radiant exposure values using second and third generation light curing units on the degree of conversion of a lucirin-based resin composite.Effect of Dental Chair Light on Enamel Bonding of Orthodontic Brackets Using Light Cure Based Adhesive System: An In-Vitro Study.Effect of High-Irradiance Light-Curing on Micromechanical Properties of Resin Cements.Factors affecting polymerization of resin-based composites: A literature review.Comparative study of surface microhardness of methacrylate-based composite resins polymerized with light-emitting diodes and halogen.Changes in irradiance and energy density in relation to different curing distances.The reciprocity law concerning light dose relationships applied to BisGMA/TEGDMA photopolymers: theoretical analysis and experimental characterization.Effects of delivering the same radiant exposures at 730, 1450, and 2920 mW/cm2 to two resin-based composites.Light curing through glass ceramics with a second- and a third-generation LED curing unit: effect of curing mode on the degree of conversion of dual-curing resin cements.Influence of successive light-activation on degree of conversion and Knoop hardness of the first layered composite increment.Light polymerization during cavity filling: effect of 'exposure reciprocity law' and the resulted shrinkage forces on restoration margins.An Evaluation of the Light Output from 22 Contemporary Light Curing Units.Light curing in dentistry and clinical implications: a literature review.Three generations of LED lights and clinical implications for optimizing their use. 1: from past to present.Structural and mechanical properties of a giomer-based bulk fill restorative in different curing conditions.The effects of irradiance and exposure time on the surface roughness of bulk-fill composite resin restorative materials.Clinical long-term success of contemporary nano-filled resin composites in class I and II restorations cured by LED or halogen light.Quartz crystal microbalance and photoacoustic measurements in dental photocuring.Guidelines for the selection, use, and maintenance of LED light-curing units - Part 1.The Effect of Bulk Depth and Irradiation Time on the Surface Hardness and Degree of Cure of Bulk-Fill Composites.Prototype of a new tip developed to be coupled to dental light-curing units for optimizing bonding of orthodontic brackets and accessories.Mechanical and Thermal Properties of Dental Composites Cured with CAD/CAM Assisted Solid-State Laser.Effect of emitted wavelength and light guide type on irradiance discrepancies in hand-held dental curing radiometers.
P2860
Q30536451-32574383-E6FC-4FDE-967B-79E59C44BA56Q34699240-C4BF89EF-8F0A-43A6-9097-5AA39965D9F1Q34734711-63D938B4-7BF0-49F2-B815-E0645AA772A9Q34760135-242AD8B5-CEF7-4442-8A37-911D00875E72Q35150860-27238980-A184-4634-9C78-3329247EB799Q35853456-FE9E0A7C-768C-488D-BBD6-DC8653683301Q35966365-6F2D7C35-22B0-4895-9E0C-8D0212FBF26CQ36135136-90164B33-AA3A-4C4F-B397-22CEE832E791Q36206347-DA195995-ECD6-4A7B-BA46-4BF09F591CE1Q36712103-714266FF-4A6B-45DB-A61D-27CB8B421551Q37970792-83F3B507-859B-45CB-A3A3-3F9A87B99137Q38598369-D991008A-E926-4D41-B89B-B9840D75DA3EQ38840085-6DD3078F-2284-46AA-BF2E-7761C8393A58Q39026024-78D85789-D213-49DE-BC49-5A6DA4A87771Q39043725-3FB53AD5-7F8D-4891-AA79-994ED5C056B9Q39296720-799AD0EA-6435-48F6-A9C7-EB0626F1B74BQ40582592-99320F33-8179-4FD3-953D-3CCBD3CB5E23Q40896958-C2552AC6-5BD8-4D18-AAD3-8FBBD543293AQ41588103-64D24ADE-E6DD-43F9-BC20-0FCC11DBE6CFQ42292886-5E7B8CC1-F363-4426-8E85-E6C7136A845EQ43665847-4B588702-89D3-417E-A763-7161C73DA409Q45051876-5ED660D5-6584-46BE-BF19-23E60B8507D9Q45916440-A9424F85-D63B-4E5F-A2A4-61A6BD0CADBDQ47215290-409E1E62-D97E-4DE9-9216-524F966C6D1DQ47680361-9BE9B682-5255-4CCD-B44C-D2FF02C4302DQ48469728-7785AC19-7B22-4C51-A9A4-DCDEB1F25BDFQ49164381-B90EF826-D7D8-42FF-AC57-A0005BB4908BQ50045057-3E387D32-34B1-4735-B01E-0B81BE3D1AC7Q50101687-2EDA7155-D1AD-4DFA-9260-1C12709A698EQ51750145-3931CB4B-63C8-4280-947E-38DBBC071023Q52871219-7D6AC062-91F8-426E-B71A-58ECCC516DA4Q53699254-E1E6CF7E-6CAD-4D98-AE10-B3F9D641A713Q54421758-393F69B4-6736-4017-9EDB-E401B2A10907Q55135983-554C6979-F5DA-4715-90EF-1138EDBF0093Q55713292-89CBF1BC-6306-4F78-B71B-6AE6CD96CBEC
P2860
description
2010 nî lūn-bûn
@nan
2010年の論文
@ja
2010年学术文章
@wuu
2010年学术文章
@zh-cn
2010年学术文章
@zh-hans
2010年学术文章
@zh-my
2010年学术文章
@zh-sg
2010年學術文章
@yue
2010年學術文章
@zh
2010年學術文章
@zh-hant
name
State-of-the-art: dental photocuring--a review.
@en
State-of-the-art: dental photocuring--a review.
@nl
type
label
State-of-the-art: dental photocuring--a review.
@en
State-of-the-art: dental photocuring--a review.
@nl
prefLabel
State-of-the-art: dental photocuring--a review.
@en
State-of-the-art: dental photocuring--a review.
@nl
P1433
P1476
State-of-the-art: dental photocuring--a review
@en
P2093
Frederick A Rueggeberg
P356
10.1016/J.DENTAL.2010.10.021
P407
P577
2010-11-30T00:00:00Z