about
A comparative evaluation of the marginal accuracy of crowns fabricated from four commercially available provisional materials: An in vitro studyComparison of marginal fit of cemented zirconia copings manufactured after digital impression with lava™ C.O.S and conventional impression techniqueAccuracy and reliability of methods to measure marginal adaptation of crowns and FDPs: a literature review.Correlation between margin fit and microleakage in complete crowns cemented with three luting agentsMeasurement of cement thickness under lithium disilicate crowns using an impression material technique.Different CAD/CAM-processing routes for zirconia restorations: influence on fitting accuracy.Clinical gap changes after porcelain firing cycles of zirconia fixed dentures.A comparison of the marginal adaptation of cathode-arc vapor-deposited titanium and cast base metal copingsMarginal and internal discrepancies related to margin design of ceramic crowns fabricated by a CAD/CAM system.A comparison of marginal fit of glass infiltrated alumina copings fabricated using two different techniques and the effect of firing cycles over them.Vertical misfit of laser-sintered and vacuum-cast implant-supported crown copings luted with definitive and temporary luting agents.The effect of different fabrication steps on the marginal adaptation of two types of glass-infiltrated ceramic crown copings fabricated by CAD/CAM technology.Marginal and internal fit of zirconia based fixed dental prostheses fabricated with different concepts.Evaluation of the marginal and internal gap of metal-ceramic crown fabricated with a selective laser sintering technology: two- and three-dimensional replica techniques.A comparitive evaluation of the marginal adaptation of zirconium coping and nickel-chromium coping using shoulder finish line design: an invitro studyComparative Evaluation of Marginal and Internal Gap of Co-Cr Copings Fabricated from Conventional Wax Pattern, 3D Printed Resin Pattern and DMLS Tech: An In Vitro Study.Comparative Evaluation of Marginal Accuracy of a Cast Fixed Partial Denture Compared to Soldered Fixed Partial Denture Made of Two Different Base Metal Alloys and Casting Techniques: An In vitro Study.Evaluation of different approaches for using a laser scanner in digitization of dental impressionsClinical Marginal and Internal Adaptation of Maxillary Anterior Single All-Ceramic Crowns and 2-year Randomized Controlled Clinical Trial.Accuracy evaluation of metal copings fabricated by computer-aided milling and direct metal laser sintering systemsEvaluation of internal and marginal fit of two metal ceramic system - in vitro studyThe effect of porcelain firing and type of finish line on the marginal fit of zirconia copingsThe effect of various veneering techniques on the marginal fit of zirconia copingsEvaluation of marginal fit of 2 CAD-CAM anatomic contour zirconia crown systems and lithium disilicate glass-ceramic crown.Marginal Gap of Milled versus Cast Gold Restorations.Marginal accuracy of nickel chromium copings fabricated by conventional and accelerated casting procedures, produced with ringless and metal ring investment procedures: A comparative in vitro studyA Comparison of the Marginal and Internal Fit of Cobalt- Chromium Copings Fabricated by Two Different CAD/CAM Systems (CAD/ Milling, CAD/ Ceramill Sintron).The Marginal Fit of CAD/CAM Monolithic Ceramic and Metal-Ceramic Crowns.Marginal and internal fit of posterior three-unit fixed zirconia dental prostheses fabricated with two different CAD/CAM systems and materials.Comparison of the fit of cast gold crowns fabricated from the digital and the conventional impression techniques.The fit of gold inlays and three ceramic inlay systems. A clinical and in vitro study.Comparison of the fit accuracy of zirconia-based prostheses generated by two CAD/CAM systemsA systematic review of CAD/CAM fit restoration evaluations.Radiographic diagnosis of dental restoration misfit: a systematic review.Marginal and internal fit of cobalt-chromium fixed dental prostheses generated from digital and conventional impressions.Effect of margin design and processing steps on marginal adaptation of captek restorations.Evaluation of marginal fit and internal adaptation of zirconia copings fabricated by two CAD - CAM systems: An in vitro study.Marginal Accuracy and Internal Fit of 3-D Printing Laser-Sintered Co-Cr Alloy Copings.Adaptation of all-ceramic fixed partial dentures.Micro-CT Evaluation of Ceramic Inlays: Comparison of the Marginal and Internal Fit of Five and Three Axis CAM Systems with a Heat Press Technique.
P2860
Q28263843-8238BE5F-D603-4D23-B843-E56E0DFDA1E1Q30831421-9C5AD842-BEB6-42F4-9F97-B3EB1BD8557BQ31110295-61E26785-7FA5-4F7B-8142-4A5E6A864691Q33393706-46F7EE53-4184-45E7-9085-8C38476EA49BQ33576028-ECEF9BD6-FF1F-433D-9D60-180A843B0D06Q33585270-71E6C7B1-61EF-4C2A-98D9-F9612CAFF151Q33857436-E6AB5C41-83E0-4C3B-81A5-48633AF9AD9AQ33922411-23D26746-166F-4413-A174-7523203FDACEQ34066015-E3B457D5-6D22-466E-8332-084B025205D6Q34132948-616A218F-E00B-497E-ACF2-2DC5A9ACE10EQ34155772-FE5C4D30-8396-409C-8875-7253AAC0CFC0Q34174982-BF4B6189-8674-47D8-A3E1-B5F55007D8DFQ34714216-4B9F07AE-126A-455C-9574-A6601FEA2297Q34766943-6AD7EDD4-C252-4A57-932B-ED583EC42BBDQ35057348-6EE593FA-C17F-4ABD-A6A3-F28AD5101B6FQ35085292-F0ED5D0E-FB03-4997-82F5-AE24CE2C6E32Q35113607-1763A546-C2D5-42D9-8DD6-19841CF5786AQ35113635-50AAEE65-2CB2-4593-9528-B7C388AE7EA3Q35252027-19E85B41-D6C7-4519-B75A-25A54E789148Q35554872-EB02094F-1163-483D-8D22-34AC90C34A3CQ35555724-61315C12-2A5F-49B1-AB5A-1813D17440FEQ35653527-0F867DAF-310C-4609-B392-97413A3859CCQ35682136-F4CA0598-D138-4E14-A79E-E3A2757ECDD0Q35761916-2E454CCD-0BD5-4512-8598-00857F763179Q35914494-AAE7ACDE-67F5-491C-8E90-3B44D5072448Q35940527-24AC62E1-327E-4FB3-A316-8287D40ACE86Q36220282-EECA6652-46F4-4093-9F5D-93504E48FF16Q36268027-10CC7BEE-9B58-4DB5-8DCB-225C16347212Q36270549-D2B54EB9-14A7-4EBF-B34E-2403B192FAD8Q36292563-D15E204E-926F-4310-906F-4663499E7FD4Q36755349-8E565742-8710-4FF9-8E83-C730A0F33A80Q37528423-06E00340-5D49-4A6E-843E-58F6D439740DQ38222241-102DDAD7-6961-4AF8-8116-09285D4CBF78Q38241690-D44AD556-54A8-4DB1-BD7C-544E89DF0573Q38342392-E9EE4A31-D36B-4BBF-99C6-35A272B577D2Q38364561-73C706EF-4925-4899-AB07-8C0ECCD87665Q38585568-E551DB92-8946-4CD4-8763-D659AE025A4AQ38643756-724CC6AC-DAEE-4159-9F35-CB8E527383A5Q38654806-C3945E83-8838-4BB2-A20F-76F072BD39B8Q38816882-2B9C00BB-FE9B-45D0-830F-D408E2FAF1BD
P2860
description
1989 nî lūn-bûn
@nan
1989年の論文
@ja
1989年論文
@yue
1989年論文
@zh-hant
1989年論文
@zh-hk
1989年論文
@zh-mo
1989年論文
@zh-tw
1989年论文
@wuu
1989年论文
@zh
1989年论文
@zh-cn
name
Considerations in measurement of marginal fit.
@en
type
label
Considerations in measurement of marginal fit.
@en
prefLabel
Considerations in measurement of marginal fit.
@en
P2093
P1476
Considerations in measurement of marginal fit.
@en
P2093
P304
P356
10.1016/0022-3913(89)90170-4
P407
P577
1989-10-01T00:00:00Z