Marginal and internal discrepancies related to margin design of ceramic crowns fabricated by a CAD/CAM system.

Marginal and internal discrepancies related to margin design of ceramic crowns fabricated by a CAD/CAM system.

Item
http://www.wikidata.org/entity/Q34066015
Assessment of Chair-side Computer-Aided Design and Computer-Aided Manufacturing Restorations: A Review of the LiteratureInfluence of Tooth Preparation Design on Fitting Accuracy of CAD-CAM Based Restorations.Examination of the Position Accuracy of Implant Abutments Reproduced by Intra-Oral Optical ImpressionCad-cam procedure and implant-prosthetic rehaBilitation. Case reportComparison of the fit accuracy of zirconia-based prostheses generated by two CAD/CAM systemsA systematic review of CAD/CAM fit restoration evaluations.Tooth preparation for full-coverage restorations-a literature review.Interdisciplinary interface between fixed prosthodontics and periodontics.Influence of conventional and digital intraoral impressions on the fit of CAD/CAM-fabricated all-ceramic crowns.Clinical evaluation comparing the fit of all-ceramic crowns obtained from silicone and digital intraoral impressions.Comparison of Conventional Methods and Laser-Assisted Rapid Prototyping for Manufacturing Fixed Dental Prostheses: An In Vitro Study.Marginal Fit of Lithium Disilicate Crowns Fabricated Using Conventional and Digital Methodology: A Three-Dimensional Analysis.Are different generations of CAD/CAM milling machines capable to produce restorations with similar quality?Evaluation of the marginal fit of full ceramic crowns by the microcomputed tomography (micro-CT) technique.Durability and Weibull Characteristics of Lithium Disilicate Crowns Bonded on Abutments with Knife-Edge and Large Chamfer Finish Lines after Cyclic Loading.
P2860

Marginal and internal discrepancies related to margin design of ceramic crowns fabricated by a CAD/CAM system.

Item
http://www.wikidata.org/entity/Q34066015
description
2011 nî lūn-bûn
@nan
2011 թուականի Նոյեմբերին հրատարակուած գիտական յօդուած
@hyw
2011 թվականի նոյեմբերին հրատարակված գիտական հոդված
@hy
2011年の論文
@ja
2011年論文
@yue
2011年論文
@zh-hant
2011年論文
@zh-hk
2011年論文
@zh-mo
2011年論文
@zh-tw
2011年论文
@wuu
name
Marginal and internal discrepa ...... abricated by a CAD/CAM system.
@ast
Marginal and internal discrepa ...... abricated by a CAD/CAM system.
@en
Marginal and internal discrepa ...... abricated by a CAD/CAM system.
@nl
type
label
Marginal and internal discrepa ...... abricated by a CAD/CAM system.
@ast
Marginal and internal discrepa ...... abricated by a CAD/CAM system.
@en
Marginal and internal discrepa ...... abricated by a CAD/CAM system.
@nl
prefLabel
Marginal and internal discrepa ...... abricated by a CAD/CAM system.
@ast
Marginal and internal discrepa ...... abricated by a CAD/CAM system.
@en
Marginal and internal discrepa ...... abricated by a CAD/CAM system.
@nl
P1433
P1476
P2093
P2860
P304
P31
P356
P407
P433
P478
P577
P698
P356
P1433
P1476
Marginal and internal discrepa ...... abricated by a CAD/CAM system.
@en
P2093
P2860
P304
P31
P356
10.1111/J.1532-849X.2011.00793.X
P407
P433
P478
P577
P698