about
Effects of local cooling rate and processing variables on leucite in dental porcelainInterobserver variability in assessment of signs of TMD.A philosophy of dental practice.A rationale for retrievability of fixed, implant-supported prostheses: a complication-based analysis.Guidelines for a minimum acceptable protocol for the construction of complete dentures.Laser-welded titanium frameworks supported by implants in the edentulous maxilla: a 2-year prospective multicenter study.A two-center retrospective analysis of long-term clinical and radiologic data of TiUnite and turned implants placed in the same mouth.A novel method for defining and transferring to the laboratory the esthetic data of the edentulous patient: a randomized clinical trial.Correlation of topography to bond strength of etched ceramic.Clinical experiences with laser-welded titanium frameworks supported by implants in the edentulous mandible: a 5-year follow-up study.Porcelain veneers: dentin bonding optimization and biomimetic recovery of the crown.A laboratory investigation of the accuracy of two impression techniques for single-tooth implants.Effect of Nd:YAG laser irradiation on shear bond strength of glass-lonomer luting cement to dentin surface.Measurement of the margins of partial-coverage tooth preparations for CAD/CAM.New approach for evaluating metal-porcelain interfacial bonding.Implant-supported welded titanium frameworks in the edentulous maxilla: a 5-year prospective multicenter study.Temperature changes at the implant-bone interface during simulated surface decontamination with an Er:YAG laser.Gingival sulcus simulation model for evaluating the penetration characteristics of elastomeric impression materials.Implant-supported laser-welded titanium and conventional cast frameworks in the partially edentulous law: a 5-year prospective multicenter study.Factors affecting the shear bond strength of bonded composite inlays.A comparison of laser-welded titanium and conventional cast frameworks supported by implants in the partially edentulous jaw: a 3-year prospective multicenter study.In vitro fracture force and marginal adaptation of ceramic crowns fixed on natural and artificial teeth.An investigation of self-reinforced poly(methyl methacrylate) denture base acrylic resin using scanning electron and atomic force microscopy.Time needed for data collection in clinical studies on fixed prosthodontics.Evaluation of the precision of three implant transfer impression techniques using two elastomeric impression materials.A comparison between computerized tomography, magnetic resonance imaging, and laser scanning for capturing 3-dimensional data from an object of standard form.The influence of different cements on the fracture resistance and marginal adaptation of all-ceramic and fiber-reinforced crowns.Integration of laser surface digitizing with CAD/CAM techniques for developing facial prostheses. Part 2: Development of molding techniques for casting prosthetic parts.A comparison between computerized tomography, magnetic resonance imaging, and laser scanning for capturing 3-dimensional data from a natural ear to aid rehabilitation.The flexural properties of fiber-reinforced composite with light-polymerized polymer matrix.Microstructures of brazings and welds using grade 2 commercially pure titanium.A review of clinical and technical considerations for fixed and removable implant prostheses in the edentulous mandible.The reporting of randomized controlled trials in prosthodontics.Immediate implant-supported oral rehabilitation using a photocurable plastic skull model and laser welding. A technical note on the screw-retained type: Part 1.A method aimed at achieving passive fit in implant prostheses: case report.A comparison of prosthetic ear models created from data captured by computerized tomography, magnetic resonance imaging, and laser scanning.The effect of sulcular width on the linear accuracy of impression materials in the presence of an undercut.Three-dimensional accuracy of CAD/CAM titanium and ceramic superstructures for implant abutments using spiral scan microtomography.Determining Favorable Maxillary Implant Locations Using Three-Dimensional Simulation Software and Computed Tomography Data.Integration of laser surface digitizing with CAD/CAM techniques for developing facial prostheses. Part 1: Design and fabrication of prosthesis replicas.
P1433
Q28166711-0A8CEF15-6DEA-4981-B689-5AB7BC6FE9EDQ30320939-BD2DC227-6821-4551-A203-E73885CC2A84Q30333592-5778CB38-0E28-417E-ADBA-243E272C4368Q30360019-083C48FB-F9AE-41D8-97BF-98BCE7B109DEQ30360056-41E9118B-695E-4BCF-9826-CB213D72BA01Q30634968-76F88207-DB96-4835-ADDD-6C296EED7905Q30654197-EE7516FB-B70C-4496-BF24-9B966B0F6E3AQ30664637-3B9183B0-9D0A-41CF-8001-B11AB3B39C53Q30669290-7E9CE646-B4E9-4896-AB72-D6DD5BBC164CQ30669304-35866055-283E-42EE-BF49-D891BC6F182BQ30716615-47BD663F-BD10-44F9-BA5E-0A77E98BF3F8Q30812389-2AF63522-FFFF-4CC0-9F22-612BBBC6C660Q30826578-F3BADB3A-DE7F-4622-835E-FBF0304B0E11Q30844942-F7011BAB-B87D-42BD-B366-85C4998A1715Q30871521-F2BC8E31-FD3D-4595-8909-FBF024E4374FQ30873658-0662D98C-3DB4-4840-8242-EBFE9F34F7D9Q30873664-C8EED194-C2FE-4A56-B536-550F3BD71A5AQ30980204-FE32CD27-BB6F-4D13-9B87-CB150C991911Q30980208-8D5F9B77-BAEB-4189-9BB7-E42DB6BF5EA5Q30980671-61BA2018-96AE-46DF-A6EC-788A3E0238BFQ30980688-810AA78E-2C3F-4034-9590-9A1471BBFAF2Q30980693-FC1A250C-FD36-457A-95DA-A87313521D5EQ30980699-C2CF43DE-FBBF-4A99-B821-9E7B81106D22Q30981864-87057583-E3F8-4F19-B109-10F0B8D3BFD7Q30995136-143FAC04-7AD9-43D8-B834-18ABCE620295Q31011019-CB646006-605C-4D5C-9E9C-F8159EE53DFEQ31030187-60F0B4FE-11C8-426A-87B1-EA2232704F73Q31030193-EF9E32BA-A96C-4B3C-A39D-9D3E64CE6D29Q31032426-47CCA5A1-0507-4FE0-99C1-EC940AE5F514Q31038660-EF5D0FC4-3992-4055-8836-B9E0ED743397Q31038667-2EFA4AA8-50F7-492F-8A42-852925BE42EEQ31041980-9E971CAC-603C-46BA-807A-7D368E2A84E5Q31078974-5060E672-F2EB-4407-9D23-00C556330D85Q31079032-57EFDD94-94B5-49E2-B7BC-67CA6B1AE09DQ31079231-2AEBE114-5DC4-4C5E-AF9A-256E84D52816Q31116358-9A997F72-090E-4A86-A38F-289A720AAC85Q31127772-C3E01781-B1D1-4EA2-B8FF-8E7C22156B20Q31136486-59EFF80F-B638-4A46-A001-5E0BB3A463C3Q31154611-E76EBE6C-468F-4122-B45D-D4BEBB08E4FAQ31156010-F32ABF19-0843-4D31-9187-D48F9A761534
P1433
description
czasopismo naukowe
@pl
journal
@en
revista científica
@es
rivista scientifica
@it
vědecký časopis
@cs
wetenschappelijk tijdschrift
@nl
wissenschaftliche Fachzeitschrift
@de
مجلة
@ar
name
International Journal of Prosthodontics
@ast
International Journal of Prosthodontics
@da
International Journal of Prosthodontics
@en
International Journal of Prosthodontics
@es
International Journal of Prosthodontics
@fi
International Journal of Prosthodontics
@fr
International Journal of Prosthodontics
@it
International Journal of Prosthodontics
@nb
International Journal of Prosthodontics
@nl
International Journal of Prosthodontics
@nn
type
label
International Journal of Prosthodontics
@ast
International Journal of Prosthodontics
@da
International Journal of Prosthodontics
@en
International Journal of Prosthodontics
@es
International Journal of Prosthodontics
@fi
International Journal of Prosthodontics
@fr
International Journal of Prosthodontics
@it
International Journal of Prosthodontics
@nb
International Journal of Prosthodontics
@nl
International Journal of Prosthodontics
@nn
prefLabel
International Journal of Prosthodontics
@ast
International Journal of Prosthodontics
@da
International Journal of Prosthodontics
@en
International Journal of Prosthodontics
@es
International Journal of Prosthodontics
@fi
International Journal of Prosthodontics
@fr
International Journal of Prosthodontics
@it
International Journal of Prosthodontics
@nb
International Journal of Prosthodontics
@nl
International Journal of Prosthodontics
@nn
P3181
P1055
P1058
P1156
P1277
P1476
International Journal of Prosthodontics
@en