about
DensiProbe Spine: a novel instrument for intraoperative measurement of bone density in transpedicular screw fixation.Reinforcing the role of the conventional C-arm--a novel method for simplified distal interlocking.Treatment of distal humeral fractures using conventional implants. Biomechanical evaluation of a new implant configuration.A biomechanical comparison of fixed angle locking compression plate osteosynthesis and cement augmented screw osteosynthesis in the management of intra articular calcaneal fracturesMicrostructural parameters of bone evaluated using HR-pQCT correlate with the DXA-derived cortical index and the trabecular bone score in a cohort of randomly selected premenopausal womenBiomechanical investigation of a minimally invasive posterior spine stabilization system in comparison to the Universal Spinal System (USS)Implant augmentation: adding bone cement to improve the treatment of osteoporotic distal femur fractures: a biomechanical study using human cadaver bonesAdjacent vertebral failure after vertebroplasty: a biomechanical study of low-modulus PMMA cement.Monitoring Healing Progression and Characterizing the Mechanical Environment in Preclinical Models for Bone Tissue Engineering.New approaches for cement-based prophylactic augmentation of the osteoporotic proximal femur provide enhanced reinforcement as predicted by non-linear finite element simulations.Prophylactic augmentation of the osteoporotic proximal femur-mission impossible?Multiphasic modelling of bone-cement injection into vertebral cancellous bone.Biomechanical performance of different cable and wire cerclage configurations.Fatigue performance of angle-stable tibial nail interlocking screws.Assessment of ankle and hindfoot stability and joint pressures using a human cadaveric model of a large lateral talar process excision: a biomechanical study.The locking attachment plate for proximal fixation of periprosthetic femur fractures--a biomechanical comparison of two techniques.A biomechanical study on proximal plate fixation techniques in periprosthetic femur fractures.Cement augmentation of lag screws: an investigation on biomechanical advantages.Cement augmentation of hip implants in osteoporotic bone: how much cement is needed and where should it go?Limited V-shaped cement augmentation of the proximal femur to prevent secondary hip fractures.Two-leg alternate loading model--a different approach to biomechanical investigations of fixation methods of the injured pelvic ring with focus on the pubic symphysis.Biomechanical in vitro assessment of screw augmentation in locked plating of proximal humerus fractures.Quantification of cancellous bone-compaction due to DHS Blade insertion and influence upon cut-out resistance.Is a helical shaped implant a superior alternative to the Dynamic Hip Screw for unstable femoral neck fractures? A biomechanical investigation.A cadaveric biomechanical study comparing the ease of femoral nail insertion: 1.0- vs 1.5-m bow designs.Bone Mass Distribution of the Distal Tibia in Normal, Osteopenic, and Osteoporotic Conditions: An Ex Vivo Assessment Using HR-pQCT, DXA, and Computational Modelling.Analysis of sacro-iliac joint screw fixation: does quality of reduction and screw orientation influence joint stability? A biomechanical study.Mechanobiologically optimized 3D titanium-mesh scaffolds enhance bone regeneration in critical segmental defects in sheep.Biomechanical comparison of augmented versus non-augmented sacroiliac screws in a novel hemi-pelvis test model.Angulated locking plate in periprosthetic proximal femur fractures: biomechanical testing of a new prototype plate.Effect on dynamic mechanical stability and interfragmentary movement of angle-stable locking of intramedullary nails in unstable distal tibia fractures: a biomechanical study.Biomechanical evaluation of bone-cement augmented Proximal Femoral Nail Antirotation blades in a polyurethane foam model with low density.Nonlinear quasi-static finite element simulations predict in vitro strength of human proximal femora assessed in a dynamic sideways fall setup.End caps prevent nail migration in elastic stable intramedullary nailing in paediatric femoral fractures: a biomechanical study using synthetic and cadaveric bones.Mechanical torque measurement predicts load to implant cut-out: a biomechanical study investigating DHS anchorage in femoral heads.Biomechanical evaluation of a new augmentation method for enhanced screw fixation in osteoporotic proximal femoral fractures.Bone cement flow analysis by stepwise injection through medical cannulas.Implicit modeling of screw threads for efficient finite element analysis of complex bone-implant systems.Cement augmentation of implants--no general cure in osteoporotic fracture treatment. A biomechanical study on non-displaced femoral neck fractures.Augmented screws in angular stable plating of the proximal humerus: what to do when revision is needed?
P50
Q30318758-EECC9B0B-0BB7-4179-B1AE-8CB79FD7EE73Q30510333-493EA490-EB95-4258-B5CB-34BCE5FBC8B1Q33649110-4BCDAC5E-B10F-408E-B2D1-892A19F3FFB6Q33969753-61F8263E-405A-400A-92D1-5FCBE4A08E04Q35097644-9FB7D335-8B3B-4B5C-957F-DD66816387D0Q35966779-0B90E20F-1167-4BFD-84FF-393CF81ACAFFQ36193618-D8A3E63B-E93E-40D2-BA41-F2A071C084CFQ36274761-E944D310-1A0E-49BF-A22C-EBCAB556150BQ38617857-090DBE3F-901B-4C9D-A326-ED0342E7DD49Q38747565-CB516922-3646-4F64-9DAF-94D3CA11FD50Q38778102-36F7E5A6-E748-49FA-A2AE-A7609CE037BDQ39103331-B2A2FD93-FABF-443B-A5E8-F4D9F438FCAAQ41824279-D60971C7-5EE4-4E03-ABC9-DAA5CFFBD2EEQ41906427-3E490C00-5EB5-4900-A885-352A5636F22CQ42081538-2BFC68CA-CE20-4C91-932F-0B559DED933BQ42321227-2F6940E6-6570-4230-99D7-80AB13B7A7F9Q44618653-344F6C35-056A-4E07-820A-A126DAC40E49Q44793606-4C216636-59E7-46A3-89BB-7515711942C8Q45240360-BBCAEDF7-99D0-4424-91E6-9A56B04C70F9Q45762226-A2156B7F-811F-45A6-92CA-6576187BCC63Q46075097-56F42ADB-A0FA-46BE-89C0-59577844BDD5Q46509389-E062E3F0-9C3C-4FB0-9C57-3D64AFD31D2CQ47232747-67047147-3258-4C6E-A3F4-B908530D3A52Q47260398-150883E1-4173-4EE6-BFF5-E3FDAB920A0DQ48042797-83153F56-AD56-4A55-9B99-C6D62557B099Q48054820-E3731F15-6D24-48B3-A0BC-7D3EF51ECBA3Q48124880-0FAD3F32-305B-4EAC-9DD0-38135DBE5D04Q48268163-D0C86416-2DA0-4321-B4B3-D27FEC2D87D0Q48600090-6C71FE48-CC8D-4D27-8DCE-A1B83A8CE6D9Q48783909-279167BF-33B1-47F7-9CA8-F9699D63C55FQ48812046-DCEE2C39-06D9-44C8-ACBA-1B40C5C3CCE3Q50674744-58DD6632-5575-48AC-A334-83F19613ECC6Q50748059-C7C9AFA9-B9B4-4FDE-A791-6B353824424EQ51039038-D305DD79-00DE-4F0E-9319-97B905A0D23CQ51094480-F83C2812-FBAF-4C1D-B4D9-1326435EFD60Q51128355-CBFF88BB-DA70-4077-B6BA-32DE85531C87Q51140557-B7196742-9FA6-4C18-9316-CDAF67BE2A0DQ51340654-1B80218C-20BC-4AA2-BE9F-D3A07BFFE0DBQ53182439-86039376-697C-4993-89E9-B674A76C4312Q53428758-B4D9ED3B-65E8-47CF-A68D-AD40EF4E20B6
P50
description
onderzoeker
@nl
researcher
@en
հետազոտող
@hy
name
Markus Windolf
@ast
Markus Windolf
@en
Markus Windolf
@es
Markus Windolf
@nl
type
label
Markus Windolf
@ast
Markus Windolf
@en
Markus Windolf
@es
Markus Windolf
@nl
prefLabel
Markus Windolf
@ast
Markus Windolf
@en
Markus Windolf
@es
Markus Windolf
@nl
P106
P108
P31
P496
0000-0001-8077-6914